Stone Column

STONE COLUMN: Silicosis: Dangerous from Many Angles

May 1, 2006
/ Print / Reprints /
/ Text Size+

Last year, Judge Janis Graham Jack of the Federal District Court in Corpus Christi, TX, questioned the validity of several thousand silica claims that were before her. And in the wake of this questioning, it was found that about 65% of the plaintiffs had also filed claims for asbestos in the past. In a harshly worded decision, Judge Jack, a former nurse, declared that many of the medical findings in the silicosis lawsuit before her were worthless and that they had been “manufactured for money.” She remanded the lawsuit to state courts, and since then, more than half of those 10,000 silica claims have been dismissed - most of them voluntarily by the law firms that filed them.

Then in March of this year, the “silicosis lawsuit scandal” took center stage in Congress, with many of the doctors involved pleading the Fifth Amendment (including one doctor who once diagnosed 515 people in a single day and another who diagnosed 297 in one day). In effect, the “Next Great Class Action Suit,” was turned away - for now.

However, the dangers of silicosis in the stone industry are very real, for a variety of reasons. To begin with, silicosis remains a potentially fatal disease, and it has been a danger to the trade since the stoneworkers of antiquity. As far as the U.S. stone industry is concerned, the term “silicosis” wasn't used in the U.S. until 1915, according to “Deadly Dust,” a book written by David Rosner, who also pointed out that this was right around the time that the Granite Cutters' Union of Barre, VT, complained that the ailment was “claiming every granite cutter in this vicinity before he reaches 50.” And though employer awareness has increased and working conditions have improved dramatically over the course of the 20th century, silicosis remains a safety concern for stone producers - both in the quarry and in the fabrication shop.

But while employee health is obviously a key concern, the avalanche of silica claims in the “silicosis lawsuit scandal” underscores the very real threat of continued lawsuits in the future - ones that could potentially cost a company owner their business.

At the recent Building Stone Institute (BSI) Convention in San Diego, I attended a seminar on silicosis in the workplace. Without getting technical, let me say that there are a lot of things that a fabrication shop needs to know, but there is also a great deal of information readily available. A great start would be to visit and do a search on “silicosis.”

Many attendees at the BSI seminar seemed to have a solid handle on silicosis and the risks it presents - both real and imagined. Several said that despite the “scare tactics,” a business can be protected simply by making sure they implement certain procedures in the workplace: using water when cutting and grinding as needed; using respirators; ensuring that there is adequate dust collection; etc. One company even noted that since smoking increases the risk of silicosis, it bans its employees from smoking - anywhere. But even while some stone industry members understand silicosis and its risks, there are also many new stoneworking firms entering the marketplace, and I fear that many companies out there today are not as diligent in addressing this issue.

It is not only important to have the proper procedures in place, but it is also critical to see that they are followed. Attendees at the seminar stressed the need to explain the dangers of silicosis to its employees; to express to them that it is a deadly disease. This illustrates to employees exactly why the procedures in place need to be strictly followed, and it also demonstrates that you as an employer are working to protect your employees - a key point in defending against lawsuits.

As far as evaluating your operation is concerned, a number of free sources of monitoring were cited. Several company owners reported that many insurance companies will send a representative of their safety department to a fabrication shop to do the necessary particle tests.

The presenter of the seminar, Joe O'Connor of INTEC, also noted that OSHA's consultative branch will come out and do mock inspection of a facility free of charge, including air testing. However, he added that in some cases, violations will be reported to OSHA's enforcement arm if they are not remedied.

It is also important to note that OSHA and the Marble Institute of America have entered a two-year alliance to develop information to help MIA member employers and workers recognize and prevent such hazards as exposure to silica - in addition to handling slabs of stone.

In future issues of Stone World, we will take a closer look at specific procedures being done in the field to prevent silicosis, but in the meantime, it would be wise for fabrication shops to make sure to have an effective silicosis prevention program in place. It's well worth the effort.

Did you enjoy this article? Click here to subscribe to Stone World 

Recent Articles by Michael Reis

You must login or register in order to post a comment.



Image Galleries

The Stone Fashion Show at Marmomacc in Verona

As usual, stone suppliers from Italy and around the world relied on the Marmomacc fair to showcase some of the latest stone materials to the international marketplace. The following is a look at just some of the stone materials on display in Verona.

Stone World Magazine

Stone World July 2014 cover

July 2014

Check out the latest issue of Stone World, which includes a review of the 2014 Coverings conference.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD Summer 2014 cover

2014 Summer

Check out articles about the Windy Creek Casino renovation,the El Alear Condominium complex in San Pedro Garza Garcia, and a Coverings product review.

Table Of Contents Subscribe


Are you aware of the new stone standard – ANSI/NSC 373 Sustainability Assessment for Natural Dimension Stone?
View Results Poll Archive

The Stone World Store

How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Stone Guide

2014 Stone World Stone Guide

The directory for Stone, Equipment and Supplies - the single information resource readers turn to.

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out to register for upcoming fabricator and installer seminars.


facebook logo Twitter  YouTubeGoogle+