Restoring the historic value of a grand hotel

The historic Fort Harrison Hotel recently underwent an extensive renovation that included replacing many of the stone elements. The majority of the exterior walkway areas and stair treads feature Peruvian travertine supplied by Andean Stone Co. of Miami, FL.


Constructed in the 1920s, the stone architecture for the Fort Harrison Hotel has through the years served as a symbol for the Clearwater, FL, area. And because of the building’s historic significance, any type of restoration work needed to fit the hotel’s five-star setting, while also utilizing materials and installation methods that would convey the original design intent.

The Fort Harrison Hotel originally opened in 1926 as the New Fort Harrison Hotel. It was often considered one of Clearwater’s most lavish hotels, serving as a focal point for the community during tougher times, such as the Great Depression and World War II.

The pavers and brushed tiles for the balcony and walkway areas measure 16 x 16 inches with a 1-inch thickness.

After falling into a less than optimal state, it was purchased by the Church of Scientology in the 1970s, and the group continues to operate the hotel today. “They’re very diligent stewards of the facility and keep it in shape,” said Barbara Mullenex of OPX Architects in Washington, DC, which served as the architect for the renovation project. “They had a desire to restore it to a five-star quality hotel. As such, we replaced in time a lot of the stone.”

“We had great success with the travertine from Peru,” said Chuck Fazio, who worked on the project for Nova Hotel Renovation & Construction in Clearwater, FL, the installer for the job. “It was a sandpaper installation, and we used a thin-set acrylic adhesive to help ensure the adhesion.”

The most recent renovation included the public balcony and walkway areas, pool copings, guest bathroom vanities and shower spaces as well as new flooring in the guest rooms and four levels of the lobby. The renovation involved some methods that would restore the original architectural intent of the structure.

“You’re working with an historic context - taking old photographs and trying to recreate them,” said Mullenex. “We did some demolition to see what was under the layers and replicated that.”

The exterior walkways of the hotel, including outdoor balconies, feature Peruvian travertine in Mezzo, a cream color, bordered by a rustic gold travertine.

For the balcony and walkway areas - as well as stair treads and pool coping - a Peruvian travertine, supplied by Andean Stone Co. of Miami, FL, was selected. Two varieties of travertine were selected - Mezzo, a cream color that was used for the main field tile, along with a rust/gold-colored travertine as a border.

The cream-colored travertine carries through a range of exterior spaces, including the pool area.

The pavers and tiles for the balcony and walkway areas measure 16 x 16 inches with a 1-inch thickness, while the tiles for the pool copings were also done in a 16- x 16-inch size, but with a 3/8-inch thickness. All of this stonework features a brushed finish. Meanwhile, the stair treads measure 80 x 20 inches.

“We had great success with the travertine from Peru,” said Chuck Fazio, who worked on the project for Nova Hotel Renovation & Construction in Clearwater, FL, the installer for the job. “It was a sandpaper installation, and we used a thin-set acrylic adhesive to help ensure the adhesion.

A fountain near the pool is highlighted by the rustic gold travertine, which serves as its border.

“The biggest challenge was selecting the colors and getting them uniform. “The tiler has to sort them to get the right range of colors. You don’t want a checkerboard pattern in certain areas, unless it’s consistent throughout.”

In the guest rooms, the primary stone material is Crema Marfil marble, which was used for the vanity tops as well as bathroom floor and wall tiles. “Basically, all of the bathroom walls are done in Crema Marfil,” said Fazio, adding that many of the presidential suites utilize about 10 different marbles.

The hotel, especially its rooftop area, is symbolic of the Clearwater community. “The rooftop of the hotel is prominent,” said Barbara Mullenex of OPX, which served as the architect for the project. “It’s on the skyline of Clearwater.”

Fazio explained that some concerns had come in securing the proper stone for the different areas. “There’s a lot available, but sometimes you have to search and special order,” he said. [The stone] is not hard to get, but it’s not always in stock. The advantage in using [Andean Stone Co. for the Peruvian travertine on the exterior] was once we put in an order, they were able to provide it right away.”

Fabrication took 10 weeks, while the installation took close to three months - with as many as 40 to 45 installers on site at once. Typically, though, there were 10 to 12 workers present on average. “The project took a lot of coordinating between the field, supervision and stone fabrication,” said Fazio.

rema Marfil marble, hand selected from Spain, is used in all of the bathrooms for a variety of elements.

Additionally, Mullenex added that since the building was an older structure, the surfaces were not level and squared. “It took quality craftsmanship,” she said.

Members of OPX were on site during the entire installation, and the project was completed in January 2009. “The hotel has been restored to its grandeur,” said Mullenex. “While the hotel is only open for Scientology guests, the public spaces are open to everyone - for instance the ballroom on the top floor can be rented out. The rooftop of the hotel is prominent. It’s on the skyline of Clearwater. It’s such a symbol to the area - this project has been a community event. It’s a beautiful project, one that you don’t get to do very often.”

Sidebar: Fort Harrison Hotel renovation

Clearwater, FL

Architect: OPX Architects, Washington, DC

Stone Supplier: Andean Stone Co., Miami, FL (Peruvian travertine)

Stone Installer: Nova Hotel Renovation & Construction, Clearwater, FL

Did you enjoy this article? Click here to subscribe to Stone World 

Recent Articles by Alexis Fisher

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

Surfaces 2013 preview

Surfaces 2013 -- to be held in conjunction with StonExpo/Marmomacc Americas -- is slated for January 29 to 31 at the Mandalay Bay Convention Center in Las Vegas, NV. The show, which also includes an extensive educational program that will be held from January 28 to 31, provides a place for thousands of floor covering retailers, distributors, installers, architects, designers and builders from around the world to gather and view the latest products, get vital education, network with other floor covering professionals and conduct business.

More than 600 of the largest manufacturers and suppliers representing products in every major category, including carpet, tile, hardwood, rugs, laminate, resilient and stone, are expected to exhibit at the trade show. Hanley Wood, owner and operator of the exhibition, reports that they have many new exhibiting companies and returning ones who have expanded their booth size. Additionally, Surfaces 2013 will host more than 40 workshops, seminars and mini sessions led by industry experts in the fields of business, sales, marketing, installation and design. Attendees can earn AIA, NKBA, AIBD, IICRC and AIA/CES industry designation. Here is just a small sampling of some of the displays that will be present at Surfaces 2013.

THE MAGAZINE

Stone World Magazine

SW May 2013 cover

May 2013

Stone World's new issue includes a feature on the restoration of St. Joseph Cathedral in Sioux Falls, SD as well as an inside look at the Artisan Group’s annual fabrication event in Austin, TX.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD Spring 2013 cover

2013 Spring

CSTD's Spring issue features a special on Kitchen and Bath renovation. This edition also takes a look at the continuing popularity of quartz surfacing.

Table Of Contents Subscribe

Business Staff

How is your business currently staffed?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Stone Guide

cover

The directory for Stone, Equipment and Supplies - the single information resource readers turn to.

Visit Stone Guide today!

  

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out stoneindustryeducation.com to register for upcoming fabricator and installer seminars.

STAY CONNECTED

facebook logo Twitter  YouTube