Re-Emerging U.S. Stone Industry: Pennsylvania stone producer continues to expand

August 1, 2006
/ Print / Reprints /
ShareMore
/ Text Size+
Located in the Pennsylvania Bluestone belt, Meshoppen Stone quarries and fabricates a range of stones, including material from two quarries adjacent to the fabricating operation and offices.


In extracting the stone, the company drills and blasts test holes to find areas with suitable material.
With 25 to 30 company-owned trucks on the road at any given time, the size of Meshoppen Stone Inc.'s operation can be gauged by the amount of material it ships around the nation. The company, which was founded in 1960 and today has 100 employees, delivers Pennsylvania Bluestone and a broad range of other materials to all 48 contiguous states in the U.S.

In addition to rubble stone and boulders, the company processes full-sized blocks of material.
Based in Meshoppen, PA, the company supplies stone products such as natural flagstone, architectural flagstone and stack stone. Material is processed into pavers for patios and sidewalks in a variety of colors, textures and formats - including irregular patterns as well as tiles. Stone is also used for architectural elements such as steps, walls, fireplaces, pool copings, driveways, garden ponds and waterfalls. Recently, the company began producing thin stone veneer, which is cost competitive with the faux stone alternatives in the marketplace, according to William Ruark, the owner/president of Meshoppen Stone.

Blocks of stone are cut on large-blade circular saws from Wilson Electric. Included are saws with blade diameters of 11 feet-6 inches, 7 feet-6 inches, 5 feet and 3 feet, among others.
Located in the Pennsylvania Bluestone belt, Meshoppen Stone quarries local stone products - including material from two quarries adjacent to the fabricating operation and offices. One of these quarries provides cleft stone and flagging, and the other is used for rubble stone. Meshoppen Stone refers to the rubble material as “Colonial” stone, and it is sold as a flat flagstone used for applications such as retaining walls.

A Jaguar II bridge saw from Park Industries is used for smaller blocks and specialty work.
Although the majority of the material supplied by Meshoppen Stone originates in Pennsylvania, the company also supplies stone from locales such as Maryland, Colorado, Arizona, North Carolina, California and Vermont. Ruark explained that since the trucks are on the road delivering stone to these locations, it makes sense to bring material back so the trucks are not traveling empty.

Pieces are moved throughout some areas of the facility using Anver vacuum lifters.
The company has approximately $3 million worth of material in its inventory, and some of the most popular products include natural cleft flagging and irregular paving, according to Cheryl O'Rourke of Meshoppen Stone.

Workers also process stone by hand as needed.

Stone production

Meshoppen Stone owns and leases 12 quarries, and the extraction process is quite different than the methods used for quarrying marble or granite. A quarry site typically has 20 to 40 feet of overburden, which must be removed to get to a bed of flagging, explained Ryan Ruark, William's son, who supervises the production. The company drills and blasts test holes to find areas with suitable material, and they are permitted to work within 3-acre areas at a single time. As crews move to new sections of the site, they refill the land and plant trees to “reclaim” the old excavation areas.

Stone products are available in a broad range of sizes and formats.
The company's production facility in Meshoppen is comprised of a series of buildings, each with different functions and equipment. Blocks of stone are cut on large-blade circular saws from Wilson Electric. Included are saws with blade diameters of 11 feet-6 inches, 7 feet-6 inches, 5 feet and 3 feet, among others. Additionally, a Jaguar II bridge saw from Park Industries is used for smaller blocks and specialty work.

Meshoppen's facility in Pennsylvania maintains a vast inventory of products.
To process the thin veneer material, Meshoppen Stone added the ThinStone TXS Stone Veneer Fabrication System from Park Industries. Stone is fed into the machine on a conveyor, and two 40-inch-diameter diamond saw blades plunge cut the stone. Additionally, corner veneer pieces are finished by hand. The thin veneer pieces are then palletized and ready for shipment.

Radius work is sawn by hand, a process that relies on the skill and experience of the worker.


Stone is also flame-finished by hand as needed, depending on the finished product.



For sills, treads and pool copings, Park Wizard radial arm polishers are used to process the edges.
For sills, treads and pool copings, Park Wizard radial arm polishers are used to process the edges. Radius work is sawn by hand, a process that relies on the skill and experience of the worker. Pieces are moved throughout this area of the facility using Anver vacuum lifters.

To process thin veneer material, Meshoppen Stone added the ThinStone TXS Stone Veneer Fabrication System from Park Industries. Stone is fed into the machine on a conveyor, and two 40-inch-diameter diamond saw blades plunge cut the stone.

Water used during the fabrication process is recycled through a mud press, and the facilities use 100% recycled water.



Meshoppen Stone has 25 to 30 company-owned trucks on the road at any given time. This segment of the business has grown to the point that a new division - Meshoppen Transport - was established.
In terms of personnel, William Ruark said the company has been fortunate in hiring and retaining loyal employees. “A certain amount of training is required, but there is a culture here of stoneworking,” he said.

Did you enjoy this article? Click here to subscribe to Stone World 

Recent Articles by Michael Reis

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

The Stone Fashion Show at Marmomacc in Verona

As usual, stone suppliers from Italy and around the world relied on the Marmomacc fair to showcase some of the latest stone materials to the international marketplace. The following is a look at just some of the stone materials on display in Verona.

Stone World Magazine

Stone World September 2014 cover

2014 September

In this issue of Stone World, we have a Report from Europe, which includes a series of articles about the quarries and stone processing operations that SW editor Jennifer Adams visited as part of the Marmomacc Stone Academy.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD Fall 2014 cover

2014 Fall

In this issue of Contemporary Stone & Tile Design, we take a look at the latest developments in TPT, with a feature article and you can read more comments from Waldrep on this subject as well as other industry professionals.

Table Of Contents Subscribe

STONE STANDARD

Are you aware of the new stone standard – ANSI/NSC 373 Sustainability Assessment for Natural Dimension Stone?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Stone Guide

2014 Stone World Stone Guide

The directory for Stone, Equipment and Supplies - the single information resource readers turn to.

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out stoneindustryeducation.com to register for upcoming fabricator and installer seminars.

STAY CONNECTED

facebook logo Twitter  YouTubeGoogle+