High-Tech Equipment Stimulates Company Expansion

April 1, 2009
/ Print / Reprints /
ShareMore
/ Text Size+
In just six years, The Countertop Place of Wichita, KS, has developed into a technologically advanced fabricating shop. Inside its 18,000-square-foot facility is a line of state-of-the-art equipment.


Beginning with just a track saw in 2002, The Countertop Place of Wichita, KS, now owns a complete line of state-of-the-art equipment - turning itself into a technologically advanced fabricating shop. “We’ve come a long way in six years,” said Co-Owner Robert Larson, adding that Mike Bell is the other owner.

In September of 2007, the company added a Master JetSaw 3200 from Advanced Industrial Machinery, Inc. (AIM) of Hickory, NC, to its shop. “With the purchase of the JetSaw, we are a completely digital shop,” said co-owner Robert Larson.

Larson began his career as a general contractor in April of 1986, and by 2000, he was seeking a new venture. “I was tired of being a general contractor,” he said. “I was looking for something to get into and not be a builder anymore. I decided [stone fabrication] was what I was going to start doing.”

After completing a few miscellaneous jobs, Larson established a shop at his current location in June of 2002 - at the time it was called Fairway Ltd. “When we started in this location, I didn’t even have a bridge saw,” he said.

According to Larson, the AIM JetSaw has helped The Countertop Place double its production.

Machinery Progression

Four months at that location, Larson bought a Sierra bridge saw, followed by a Wizard radial arm polisher in March of 2003 and a Pro Edge III automated edge polisher a year later in March of 2004 - all of which came from Park Industries of St. Cloud, MN.

“The water portion on the JetSaw allows you to cut everything on the line,” said Larson.

In July of 2005, Larson explained that the company needed to go to the next level. “That’s when we got into the CNC machinery,” he said. “We switched directions and went with an Intermac 33.”

From there, the company purchased a Master JetSaw 3200 (combination waterjet/bridge saw) from Advanced Industrial Machinery, Inc. (AIM) of Hickory, NC, in September of 2007, and then in that same year, it bought an Intermac 43 CNC stoneworking center in November. “With the purchase of the JetSaw, we are a completely digital shop,” said Larson.

A Manzanelli vacuum lifter from GranQuartz of Tucker, GA, is used to maneuver slabs in the shop.

Becoming Digital and Efficient

Larson explained that after the first CNC purchase, the company at the same time bought an LT-55 digital templating system from Laser Products Industries of Romeoville, IL. “This last summer of 2008, we purchased our second one.

Along with the AIM JetSaw, the Intermac 33 and 43 CNC stoneworking centers from Intermac of Charlotte, NC, go hand in hand in the increase of the company’s production. “Basically, we’re doing twice the production since this last year due to the AIM JetSaw and the second CNC machine,” Larson said.

“Basically, we’re doing twice the production since this last year due to the AIM JetSaw, which has become the heart of the operation, and the second CNC machine,” Larson continued.

The JetSaw and the CNCs have allowed The Countertop Place to be completely efficient, according to Larson. “Not only are we digital, but also, it allows the CNC machines to be more efficient because of less steps needed to be taken,” he explained. “The waterjet portion on the JetSaw allows you to cut everything on the line. The JetSaw eliminates one step in the normal process of the CNC.”

The Intermac 43 CNC stoneworking center shapes the edges for countertops.

he company has gone from making wood templates to digitizing with an LT-55 and plotting vinyl templates with an Allen Datagraph plotter to finally eliminating the vinyl template step. “With the first CNC machine and the LT-55, we jumped to where we were making vinyl templates because you still had to make a template for the saw guy,” said Larson. “In 2007, with the purchase of the AIM JetSaw, that eliminated the need to make templates. This has been extremely important for us because of the money saved that was being spent with making templates as well as for production. With the JetSaw and the CNCs, I’ve literally doubled my production without the need of increasing employees.”

A slab yard on the property showcases the different slabs inventoried by the company.

The Business

Not only has The Countertop Place incurred technological advancements, but it has also more than quadrupled its staff inside of its current 18,000-square-foot facility. “When I started, we had four employees,” said Larson. “Now there’s a total of 17 - four of which are showroom and sales, two are laminate and solid surface workers, leaving only 11 employees for the entire stone fabrication and installation area.”

The Countertop Place does its templating with two LT-55 digital templating systems from Laser Product Industries of Romeoville, IL.

The shop runs one shift, but Larson plans to make it two almost immediately. “That will be my next step - to put on a two-man second shift for the CNCs,” he said.

Production currently allows for 1,000 square feet a week - or approximately 10 to 12 kitchens a week, along with tub surrounds, showers and outdoor barbecues, among other miscellaneous projects. The Countertop Place does all of its own stone fabrication, installation and templating. “We also do laminate countertops, quartz and, of course, granite,” said Larson. “Occasionally we do solid surface, but I’ve seen a trend of that moving more toward quartz. When comparing the two in price, most customers are swayed toward the quartz direction.”

Although the JetSaw and CNC have helped double production, Larson explained that none of the increased production rates would have been possible without the company’s first Laser Products LT-55, which it had since day one of its first CNC.

Most of the work is completed within a 30-mile radius of the company’s facility in Wichita. “Ten percent is outside the 30-mile radius, but within a 100-mile radius,” said Larson. “We probably do 70% retail and 30% builders.”

Advanced industrial machinery in The Countertop Place’s shop allows for more complex countertop shapes.

The Countertop Place does some commercial work, but mostly residential. “The market we do covers a wide variation - from $2.5 million homes to a simple renovation,” explained Larson. “We are geared toward the more custom type of work versus the average low-end builder who only cares about the cost. We have four standard edges that we include in our cost. We also have five upgraded edges that we include.”

Geared more toward high-end custom work, The Countertop Place offers four standard edges as well as five upgraded edges.

Larson explained that up until most recently, the business hasn’t been too affected by the economy. “The popularity of granite took a little longer to reach this town,” he said. “Six years ago it reached, and that’s when and why I got started. A lot of new guys have started, so they’re lower end. The type of work I do hasn’t been affected. The new guys are going after the builders, so they’re all fighting over the same customer base. Up to this point, the building [market] has been strong.

“Technology has increased my production, so now I have a reduction in prices,” he continued. “Now for a lot of my builders, I don’t need to charge for [extras].”

Production in the shop also allows for a variation of projects - from $2.5 million homes to simple renovations, according to Larson.

Ultimately, Larson would like to put on a second shift to again double the shop’s production. “This is so I can continue to maintain and reduce costs, and prevent costs from going up as a result of increased production [requirements],” he explained.

For this reason, Larson intends to continue to advocate the use of leading edge technology. “I couldn’t have done anything I’ve done without the technology and equipment,” he said.

Sidebar: The Countertop Place

Wichita, KS

Type of Work: Mainly custom stone fabrication for residential work, including full homes or renovations; some commercial

Machinery: a Sierra bridge saw, a Wizard radial arm polisher and a Pro Edge III automated edge - all from Park Industries of St. Cloud, MN; an Intermac 33 CNC and an Intermac 43 CNC stoneworking center - both from Intermac of Charlotte, NC; a Master JetSaw 3200 from Advanced Industrial Machinery, Inc. (AIM) of Hickory, NC; two LT-55s from Laser Product Industries of Romeoville, IL

Number of Employees: 17

Production Rate: 1,000 square feet a week/approximately 10-12 kitchens a week

Did you enjoy this article? Click here to subscribe to Stone World 

Recent Articles by Alexis Fisher

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

November 2013 Stone Products Gallery

Take a look at some of the latest stone industry products.

THE MAGAZINE

Stone World Magazine

April 2014 stone world cover

2014 April

In this month's issue of Stone World, check out an extensive preview of Coverings 2014, which will be celebrating its 25th anniversary in April. Also learn more about various types of limestone that were used to build private residences.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD_Spring2014_Cover.jpg

2014 Spring

This issue of Contemporary Stone & Tile Design includes our annual focus on Kitchen and Bath design

Table Of Contents Subscribe

Training Program

How formal is your training program for new employees?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Italian Trade Commission Coverings exhibitor preview

Italian Trade Commission logo 2

The Italian Trade Commission is presenting a large group of the most innovative and internationally renowned Italian suppliers of dimensional natural stones. We hope your busy schedule will allow you to join us for a “genuine” espresso in booth N. 4045 and explore the exciting Italian natural stone resources offered by our exhibitors. Check out Italian stone producers exhibiting at Coverings 2014 here!

  

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out stoneindustryeducation.com to register for upcoming fabricator and installer seminars.

STAY CONNECTED

facebook logo Twitter  YouTube