Stone World Blog


Safety Gone Wrong

May 17, 2010
/ Print / Reprints /
ShareMore
/ Text Size+
©iStockphoto.com/lisafx


Last week I received an email with the headline, “Have a Safe Work Week” from blogger extraordinaire John Sonnehalter (www.tradesmeninsights.com). John was promoting North American Occupational Safety & Health Week, which ran May 2-8. I had great intentions of blogging on this topic during the designated week.

However, maybe it’s good I missed the assigned week. By waiting, hopefully I can help you extend your focus on safety for another week. Not to be overly dramatic, but construction safety can be a matter of life and death.

During my 28 years focused on the trades, I’ve written, edited or read too many stories of safety gone wrong. Sadly, many accidents resulted in deaths or disabilities.  These tragedies include falls, trench collapses, burst pipes, equipment failures, severed digits/limbs, noxious poisonings, suffocations, and electrocutions.

Many of these accidents were preventable. Often, standard safety measures were ignored, equipment was improperly maintained, or someone acted carelessly.

As I write on this topic, I am personally convicted. Based on my own actions, I could be a poster child for safety ignorance. Here are a few of my reckless incidents:

*Shocked myself replacing a light fixture
*Fell from ladder smashing it to pieces with my hip
*Knocked myself out while removing header braces
*Severed a finger tip while “speed pruning”

You would think by the advanced age of 51, I would have learned to avoid stupid risks. You would be wrong.

Last summer, I borrowed a neighbor’s reciprocating saw to remove limbs from the trees on my lot. I had not used this power tool before and became enamored with the ease of removing branches.

In an act that clearly demonstrated my safety stupidity, I climbed to the top of my fully extended four-section ladder to prune branches well above the roofline. One branch was just out of my reach. Egged on by my terra firma-planted son, I held the tree with one arm and swung the powerful saw wildly above my head.

The good news was I cut through the branch. The bad news was it was a clean slice and the weight of the tool brought the reciprocating blade down to my shoulder. Somehow, the still-moving blade missed cutting me by an inch. I immediately retreated to the ground.

That “clean slice” through the branch could have ended very badly for me as I was completely vulnerable 20-plus feet above ground. Perhaps worse, I did this in front of my son. Fortunately, he’s way smarter and far more cautious than me. This is obviously my wife’s influence.

No matter what part of the construction market you serve – manufacturing, design, installation, maintenance, training, warehousing, or logistics – we all need to make safety a top priority.

Imagine safety this way. Do you want to make a phone call to the family of a co-worker who was involved in a tragic accident? Do you want your family to get that call?

Chances are you already know what safety practices to follow. Take a few minutes this week (every week?) to review them and share them with your co-workers.

Years ago, I enjoyed watching the police drama Hill Street Blues. At the beginning of each episode, Sgt. Phil Esterhaus would challenge the force to catch various bad guys. But he always ended roll call with these fitting words:

“Let’s be careful out there.”
You must login or register in order to post a comment.

Good Reminder

Amy Good
May 18, 2010
I really enjoyed this post. All too often we assume it will "just take a second" and nothing will happen. All too often we blaze ahead recklessly. Thanks for the reminder...hope you avoid any further mishaps.

Cambridge plumber

http://www.cambridgeplumbing.org
May 19, 2010
I suppose no matter how cautious we are, accidents are bound to happen in this kind of work line. Every handyman probably have a story of his own, a minor accident, a clean escape or a terrible story. Safety gears must always be present to minimize or avoid accidents. Your heart must have pounded so fast after that ordeal. Thanks for sharing your experience and keep safe.

Great article

Lisa Vander Meulen, Clarity Design
May 19, 2010
Great article. It's always that last quick cut that gets you. Something that is so easy... (posted via LinkedIn)

Well said!

Mike Nelson Pedde
May 24, 2010
The thing of it is, accidents happen in less than 1/2 a second. Most happen in less than 1/10th of a second. It's what leads up to that flash of time that makes a difference! There's a saying, "If you don't have time to do it right, when will you have time to do it over?" Now add to that, "And how will you do it if you don't have use of your _____? Tools can be replaced, but body parts can't, and as someone who carries a few scars myself, it's NEVER worth it to take shortcuts. In my years as a manager I've always been very strict about safety, including the proper training and awareness for 'why' it's important; it's the one thing I won't compromise. I'd rather fire (as a last resort) a healthy person who won't implement safety practices than pay disability to that same person after they've had an accident.

Multimedia

Videos

Image Galleries

November 2013 Stone Products Gallery

Take a look at some of the latest stone industry products.

THE MAGAZINE

Stone World Magazine

April 2014 stone world cover

2014 April

In this month's issue of Stone World, check out an extensive preview of Coverings 2014, which will be celebrating its 25th anniversary in April. Also learn more about various types of limestone that were used to build private residences.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD_Spring2014_Cover.jpg

2014 Spring

This issue of Contemporary Stone & Tile Design includes our annual focus on Kitchen and Bath design

Table Of Contents Subscribe

Training Program

How formal is your training program for new employees?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Italian Trade Commission Coverings exhibitor preview

Italian Trade Commission logo 2

The Italian Trade Commission is presenting a large group of the most innovative and internationally renowned Italian suppliers of dimensional natural stones. We hope your busy schedule will allow you to join us for a “genuine” espresso in booth N. 4045 and explore the exciting Italian natural stone resources offered by our exhibitors. Check out Italian stone producers exhibiting at Coverings 2014 here!

  

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out stoneindustryeducation.com to register for upcoming fabricator and installer seminars.

STAY CONNECTED

facebook logo Twitter  YouTube