A Rugged Feel In Slate

June 1, 2005
/ Print / Reprints /
ShareMore
/ Text Size+


Designer Angela Beach of Beachwood Designs recently implemented two varieties of slate into her 3,900-square-foot beach house in Sherman Oaks, a suburb of Los Angeles, CA, reflecting on the ideals for stone selection that she shares with her clients.

“I actually use a lot of slate in many homes I do,” said Beach. “I love the versatility -- all of the different variations and the cost-versus-look aspect of slate. It is a very rich look, but for a much smaller investment than any other stone.”

Chinese Multi-colored slate was employed for several elements of the beach house, including the kitchen, entryways, bathrooms and the outdoor patio area. In addition, Beach installed a 1-foot border of stone between the carpet and the wall of the living room area. The material was supplied by Western National Marble and Stone of North Hollywood, CA.

According to Beach, slate was selected for two reasons. “One was for the feel of it -- I loved the warmth and colors it brought to the house,” she said. “Two was for the cost. [Given] the square footage I needed, it was within my budget.

“I wanted that rugged feel, and I adore the blend of colors,” the designer continued. “We covered two large outdoor patios with the same slate so that we could have a seamless indoor-to-outdoor feel. We have since converted one of the patios into a bedroom, though.”

In the front of the house, Brazilian Black slate was selected for the walkway because it is “smooth and chic,” according to Beach. “I had it set on a semi-slant to add flow to the walkway, but it is such a smooth slate that you can hardly see the seams.”

Beach installed the 3,500 square feet of slate herself, and all pieces were 12 x 12 inches in size. “Sadly, I was seven months pregnant at the time, and it ended up putting me on a very restricted bed rest afterward,” she said. “But, it is still here, still looks great, and my son doles out a beating to it everyday, which it withstands beautifully.”

According to the designer, the biggest challenge with the stone was the gauging. “Even when [the slate] is gauged, it still is very rough and uneven,” she said. “This makes it hard to lay, and at times, hard to walk or roll things on. But that is one of the reasons I loved it so much -- I love the rustic look of it.”

Beach used a basic installation method with thinset mortar, and in most places, the slate was laid on a square edge-to-edge grid. However, in the living room area, the stone was laid on a diamond grid, with a 1-foot square border for variation. The process took Beach a total of 10 days, and she hired one laborer for help during the last five days. “The hardest part of the entire project was that I was enormous. Lugging the boxes when I was that pregnant was not a 'healthy workout,' “ the designer explained. “The baby hated the sound of the tile saw. Every time I had to turn it on he jumped in my belly. Then, he would put out a big kick in protest, so I had to have the laborer do all the cuts after awhile.”

Beach also found it challenging to keep the heavy stone pieces for the shower straight and vertical, and made the mortar a bit wetter than usual. “I had never done that before, and it was quite a feat,” she said. “That is when the day worker was great to have. He helped me keep the tiles in place until the mortar set. We had to constantly check them to make sure they weren't sliding out of place and setting crooked.”

Overall construction of the home took approximately six months. “I have a lot of love and praise for the slate,” said Beach, who added that people seem to love the rich colors of the material.

End box

Private Residence
Sherman Oaks, CA

Designer/Stone Installer: Beachwood Designs, Sherman Oaks, CA
Stone Supplier: Western National Marble and Stone, North Hollywood, CA

Did you enjoy this article? Click here to subscribe to Stone World 

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

November 2013 Stone Products Gallery

Take a look at some of the latest stone industry products.

THE MAGAZINE

Stone World Magazine

April 2014 stone world cover

2014 April

In this month's issue of Stone World, check out an extensive preview of Coverings 2014, which will be celebrating its 25th anniversary in April. Also learn more about various types of limestone that were used to build private residences.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD_Spring2014_Cover.jpg

2014 Spring

This issue of Contemporary Stone & Tile Design includes our annual focus on Kitchen and Bath design

Table Of Contents Subscribe

Training Program

How formal is your training program for new employees?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Italian Trade Commission Coverings exhibitor preview

Italian Trade Commission logo 2

The Italian Trade Commission is presenting a large group of the most innovative and internationally renowned Italian suppliers of dimensional natural stones. We hope your busy schedule will allow you to join us for a “genuine” espresso in booth N. 4045 and explore the exciting Italian natural stone resources offered by our exhibitors. Check out Italian stone producers exhibiting at Coverings 2014 here!

  

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out stoneindustryeducation.com to register for upcoming fabricator and installer seminars.

STAY CONNECTED

facebook logo Twitter  YouTube