Stone in Architecture / Commercial

Stone creates a presence for Durham courthouse

A North Carolina courthouse pulls together the key elements of slate, granite and limestone to establish a sense of permanence for the exterior as well as the interior

April 1, 2013
Trans

Newly constructed in Durham, NC, the Durham County Justice Building features a green slate exterior that brings an essence of grandness to the building. The overall design goal for the 318,511-square-foot courthouse was to create a civic institution that would stand to be a safe, secure and lasting structure. This objective was achieved with Broughton Moor slate with a flame-textured finish — quarried and processed by Burlington Slate, Ltd. of Cumbria, Kirkby-in-Furness, England.

“We knew from the start that we needed to use a material that represented the civic nature of the project,” explained Tim Hillhouse, project architect for Tim Hillhouse, O’Brien/Atkins Associates, PA of Durham, NC. “At one time, for budget reasons, we considered using impact-resistant gypsum wall board for the public corridors, but we quickly moved away from that idea as it would not hold up to the abuse a courthouse takes.”

With durability among the primary concerns for the courthouse, material selections were made with this in mind, along with the project’s aesthetic goals. Among the building materials chosen, a metamorphic green slate, gray granite and a cream-colored dolomitic class III high-density limestone. “These materials were selected for their unique color, finish, characteristics and veining,” explained Greg Foxworth, project subcontractor of Intrepid Enterprises, Inc., the installation contractor for the project.

Prior to construction, the project team took the time to visit the quarry to address any concerns regarding the characteristics of the stone and any fabrication issues. “With the amount of stone that we used, it was imperative to understand the variation in blocks and areas of the quarry where it was being extracted from to fully get a better picture of the product — more so than with the 12- x 12-inch samples usually provided for selection,” Hillhouse explained. “The quarrier for the slate was also the finisher, and we were able to see the finishing process and quality control that was in practice at the plant.”

A full-sized mock-up of the stonework was prepared to demonstrate the variety in color to aid the architect in determining what range of color and veining would be acceptable for the courthouse.

“We used the [Broughton Moor slate] for the exterior focal elements identifying the major public circulation areas of the building, parking deck, front entry element and stair element,” said Hillhouse. Approximately 21,000 square feet of slate was used in total for the exterior of the building, with pieces having a thickness of 1 ¼ inches. While the majority was precast cladding, handset cladding was employed in areas such as around doorways and windows.

A total of 11,600 square feet of slate was used for the parking garage, and the base of the walls feature Virginia Mist granite, supplied by LaCroix of Saint-Sebastien, Quebec, Canada. The hardscape consists of planter cladding, site sign cladding, accent paving and site retaining walls, also all made of Virginia Mist granite.

The interior design

The use of Broughton Moor slate carries inside the courthouse, with a total of 10,500 square feet featured throughout the public spaces. It is used as an identifying feature of the entry vestibules to the courtrooms and as a feature wall at the front of the courtrooms. The slate pieces used for the interior of the building had varying thicknesses of 1 ¼ and ¾ inches.

Additionally, the interior lobby and public corridors feature Croatian limestone — supplied by Henraux S.p.A of Querceta, Italy — and North Carolina Bluestone — supplied by Jacob’s Creek Stone of Denton, NC — was employed for the window sills on the interior of the offices and the courthouse bathrooms.

From an architectural standpoint, the most challenging aspect of this project was scrutinizing the shop drawings, which showed every cut piece of stone, joint condition, edge finish and how it fit with the rest of the pieces. “It was also difficult to get the rough aspects of the building, concrete work and stud work to be as precise and crisp as the stone ended up being,” said Hillhouse.

Meanwhile, the shop drawings and interior wall cladding layout were the biggest challenge for Intrepid’s installation team. The layout of the courtroom vestibule openings, i.e. doors and frames, along the public corridors were established in the shop drawings to break up the flat walls per the architect’s design.

“The proper placement of the stone wall cladding was critical to accomplish this task, with minimal room for adjustments,” Foxworth explained. “The 1/8-inch vertical joints in the stone wall cladding were designed to allow alignment with the accent bands in the terrazzo flooring and other corridor transitions.”

Intrepid Enterprises’ project superintendent, Howard Franklin, and his foreman, Charlie Peterson, were on site full time for the duration of this project. “Howard and Charlie’s personal commitment to each new job is a refreshing benefit to our clients,” said Foxworth. “They successfully performed each task, including unloading, distribution, coordination with other trades and installation of the fabricated stone to meet the requirements of the project construction schedule.”

The project was started in 2006 with design and planning. Construction began in April 2010 and wrapped up in February 2013. “Everyone has had nothing but good things to say about the project,” said Hillhouse. “I think the citizens of Durham County can be very proud.”    


Durham County Justice Building
Durham, NC

Architect: Tim Hillhouse, O’Brien/Atkins Associates, PA, Durham, NC
General Contractor: The Whiting-Turner Contracting Co., Raleigh, NC
Stone Installation Contractor: Intrepid Enterprises, Inc., Harvey, LA
Stone Suppliers: Burlington Slate, Ltd. of Cumbria, Kirkby-in-Furness, England (slate); Henraux S.p.A, Querceta, Italy (limestone); LaCroix, Saint-Sebastien, Quebec, Canada (granite); Jacob’s Creek Stone, Denton, NC (Bluestone) 
Precast Contractors: Gate Precast, Metromont Precast

Did you enjoy this article? Click here to subscribe to Stone World 

Recent Articles by Karissa Giuliano

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

November 2013 Stone Products Gallery

Take a look at some of the latest stone industry products.

THE MAGAZINE

Stone World Magazine

April 2014 stone world cover

2014 April

In this month's issue of Stone World, check out an extensive preview of Coverings 2014, which will be celebrating its 25th anniversary in April. Also learn more about various types of limestone that were used to build private residences.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD_Spring2014_Cover.jpg

2014 Spring

This issue of Contemporary Stone & Tile Design includes our annual focus on Kitchen and Bath design

Table Of Contents Subscribe

Training Program

How formal is your training program for new employees?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Italian Trade Commission Coverings exhibitor preview

Italian Trade Commission logo 2

The Italian Trade Commission is presenting a large group of the most innovative and internationally renowned Italian suppliers of dimensional natural stones. We hope your busy schedule will allow you to join us for a “genuine” espresso in booth N. 4045 and explore the exciting Italian natural stone resources offered by our exhibitors. Check out Italian stone producers exhibiting at Coverings 2014 here!

  

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out stoneindustryeducation.com to register for upcoming fabricator and installer seminars.

STAY CONNECTED

facebook logo Twitter  YouTube