Interior Design / Hospitality/Commercial Design / Green Design / Contemporary Stone & Tile Design Magazine

Celebrating North American heritage

January 8, 2013
Trans

With an emphasis on the use of local products, The Hyatt Regency Minneapolis hotel in Minneapolis, MN, is truly a reflection of its environment. The design team from Stonehill & Taylor consciously took a “local” approach when conceiving the design for the renovation project — with the majority of the furniture, fixtures and natural stone all coming from North America.

“The overall goal was to create a contemporary look that would evoke an emotion about the location of the hotel, and an elevated experience for hotel guests,” explained Michael Suomi, Principal and Vice President of Interior Design at Stonehill & Taylor of New York, NY. “Through our design, we wanted to celebrate the heritage of Minnesota and the industries that gave the state its strength. To take this beyond aesthetics, we set ourselves a goal of using as much materials and products produced within 500 miles of Minneapolis as we could.”

Suomi explained that at the start of the hotel renovation, the goal was to obtain either hematite, taconite or magnetite from within the state of Minnesota. “Almost all of the stone removed from the grounds is for the production of iron ore and prohibitively expensive for decorative use,” he said. “We overcame this by finding stone that had a similar look and graining to our preferred stone and that was within our budget.”

With this objective in mind, Virginia Mist granite was used throughout the project, and it was processed relatively close to the site in Quebec, Canada. The material was specified for the reception desks, countertops, flooring, base and stair treads, and a fireplace feature wall in the hotel’s reception area and lobby. Additionally, Mesabi Black granite — quarried locally in Minnesota— was employed for bathroom vanity tops in all the guest rooms.

“Our clients were immensely supportive of our efforts of finding materials and products that fit our design locally,” said Suomi. “We worked very closely with the purchasing agents on the project, The Stroud Group, in finding local sources for the materials we were interested in using in our design.”

The transformation

According to the architect, the hotel needed a new look for its public spaces and guest rooms. “Beyond this basic need, however, we did an assessment of functionality of public spaces and found that there were some efficiency and circulation issues,” he said. “For example, the location of the reception desk was not immediately clear to an arriving guest. Or there were public spaces, such as the breakfast area, that were operational for only a short part of the day. We collected all these observations and incorporated the solutions in our redesign.”

The flooring throughout the public spaces consists of 18- x 24-inch tiles of Virginia Mist granite, which was processed and supplied by Ancor Granite Tile Inc. of Montreal, Quebec, Canada. The stone producer also supplied the base and stair treads.

A floor-to-ceiling fireplace — comprised of slabs of Virginia Mist granite that average 8 feet x 3 feet, 6 inches in size — is the main design element of the sunken living room that was created in the lobby. Additionally, reception pods were carved from large rough-cut pieces of Virginia Mist granite.

“Virginia Mist was selected because it has a similar look and feel to the iron bearing stones — hematite, taconite and magnetite — removed from the ground in Minnesota, and it met our budget,” explained Suomi. “[For the design of the reception desks,] we were inspired by the industrial mining industry in northern Minnesota along the Gogebic Range.” The slabs for the fireplace feature wall as well as the stone for the reception desks were supplied by Granicor of Saint-Augustin, Quebec, Canada.

Moreover, Mesabi Black granite, which was quarried locally by Cold Spring Granite, was used for the vanity tops in the guest rooms. “We were delighted to find a material that was so sophisticated in its look, with a deep dark color and soft finish, quarried right in Minnesota,” said the architect. The vanity tops in the 533 guest units, as well as the hotel’s bar tops, were fabricated by Granite Tops Inc. of Cold Spring, MN.

The installation was completed by CD Tile & Stone of Blaine, MN. The floor tiles were set with Tec® Full Flex® Mortar from H.B. Fuller Construction Products Inc. of Aurora, IL, and most of the floor had a Tec® HydraFlexTM Waterproofing & Crack Isolation Membrane. The large granite wall tiles on the feature fireplace wall were installed with stainless steel relieving angles, dowels and clips.

“The fireplace was easy at the bottom, but progressively more difficult as we went up,” explained Tim Christopherson of CD Tile & Stone. “The top of the stone is 32 feet above the finished floor — the finished ceiling 35 feet. With 1,000-pound stones along the top, these pieces were extremely difficult to get in. I have to give a lot of credit to my installers. With their many years of experience and savvy, they found a way to make it work.”

Installing the large reception pods also required skilled. “The larger pieces were approximately 2,500 pounds,” said Christopherson. “We used a propane-powered forklift with nylon lifting straps.”

According to Christopherson, the job required 12 installers in the guest units and up to 12 additional workers in the lobby, working simultaneously. In total, it took approximately five weeks to complete the stone installation.

The completion

Overall, the design team did not have to spend much time on the jobsite to supervise the installation. “Our contractors did an incredible job with the installation,” said Suomi. “The project was on a fast track. From start to end, it took 13 months to complete. We are very happy to have achieved all our goals — from design and production points of view — in this short period of time. Using mostly domestically produced materials and furnishings greatly contributed to our ability to complete the renovation fast — cutting down delivery timing. We have had a great reception for the project — both from our clients and from our guests — since its official opening in June.” 

Did you enjoy this article? Click here to subscribe to Stone World 

Recent Articles by Jennifer Adams

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

November 2014 Stone Products Gallery

Check out the November Stone World image gallery!

Stone World Magazine

Stone World December 2014

2014 December

Check out Stone World's last issue of the year, which includes a recap of TISE East and Marmomacc.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD Fall 2014 cover

2014 Fall

In this issue of Contemporary Stone & Tile Design, we take a look at the latest developments in TPT, with a feature article and you can read more comments from Waldrep on this subject as well as other industry professionals.

Table Of Contents Subscribe

STONE STANDARD

Are you aware of the new stone standard – ANSI/NSC 373 Sustainability Assessment for Natural Dimension Stone?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Stone Industry Education

Stone Industry Education

From fabrication...to installation...to marketing and much more!  We provide natural stone professionals with stone knowledge and education they can count on, as well as great networking opportunities. Click here to go to Stone Industry Education.

STAY CONNECTED

facebook logo Twitter  YouTubeGoogle+

Stone Guide 2014

2014 Stone World Stone Guide

The directory for Stone, Equipment and Supplies - the single information resource readers turn to.