Stone Column

Some insight on shop and warehouse safety

March 25, 2011
KEYWORDS fabricators / MIA / OSHA / SFA
/ Print / Reprints /
ShareMore
/ Text Size+

When I was in journalism school, I was taught that the space for the editor’s column is the most valuable page in the entire magazine. And once again, I am using this prime real estate to urge the industry to focus on safety in the workplace - whether that is a shop, a warehouse, the jobsite or even the office. This is something that comes up far too often, and it is usually sparked by yet another tragedy in a fabrication shop or slab warehouse.

To help our industry, the Marble Institute of America has worked tirelessly to develop education materials that stone industry employers can use to help train their employees. One of the latest is a video entitled “Safe Stone Slab Handling II.” Created by a team of stone industry safety experts, this video runs for more than an hour, and it showcases the best practices for safe stone slab handling. It includes practices recommended by the Occupational Safety & Health Administration (OSHA), and it also outlines the hazards of not following proper procedures. In a section guaranteed to catch the attention of shop employees, the video provides an overview of more than 50 fatal stone-related accidents that have occurred over the past decade. You can order the video by visiting www.marble-institute.com/safety and a Spanish version will also be released this Spring.

In producing the video, the MIA recruited an international team of industry safety executives. For 2011, MIA expanded the committee and plans to produce a hardcopy training resource (from the safety video), develop safety competency testing, establish a Safety Certification Program and offer a subscription for monthly Toolbox safety talk outlines and Job Safety Analysis (JSA) sheets.

Looking into the practice of what fabricators are doing in their shops with regard to safety, I conducted a roundtable on the topic with members of the Stone Fabricators Alliance (SFA), and they were very candid in their responses. Topics included fabricators’ experiences with OSHA, the cost of committing to a safety program, training, techniques and more. The full roundtable begins here, but here’s a sample of what was discussed:

• On OSHA: “OSHA has always been seen as the ‘big bad wolf’ in the eyes of shop owners and contractors, but their goal is to keep workers safe and the regulations they enforce should be embraced and implemented.”

• On employee training: “We had to retrain our employees on the safe way to do tasks that, in some cases, they had been performing for seven or eight years.”

• On safety investments: “Now we use a crane with a vacuum lifter to place and position parts throughout the shop. Not only is it safer, but it increases production as well - once again proving that a safe shop is a profitable shop.”

Obviously, this is just a small taste of the commentary on this very important subject, so I encourage you to check out the full transcript, which runs from pages 64 to 66 of this issue. Moreover, if you ever want to share your ideas or practices on safety, please feel free to contact me at michael@stoneworld.com because I honestly feel that there is no end to the importance of this subject.

Did you enjoy this article? Click here to subscribe to Stone World 

Recent Articles by Michael Reis

You must login or register in order to post a comment.

Multimedia

Videos

Image Galleries

The Stone Fashion Show at Marmomacc in Verona

As usual, stone suppliers from Italy and around the world relied on the Marmomacc fair to showcase some of the latest stone materials to the international marketplace. The following is a look at just some of the stone materials on display in Verona.

Stone World Magazine

Stone World September 2014 cover

2014 September

In this issue of Stone World, we have a Report from Europe, which includes a series of articles about the quarries and stone processing operations that SW editor Jennifer Adams visited as part of the Marmomacc Stone Academy.

Table Of Contents Subscribe

Contemporary Stone & Tile Design Magazine

CSTD Fall 2014 cover

2014 Fall

In this issue of Contemporary Stone & Tile Design, we take a look at the latest developments in TPT, with a feature article and you can read more comments from Waldrep on this subject as well as other industry professionals.

Table Of Contents Subscribe

STONE STANDARD

Are you aware of the new stone standard – ANSI/NSC 373 Sustainability Assessment for Natural Dimension Stone?
View Results Poll Archive

The Stone World Store

How_To_Polish_&_Restore_Mar.gif
How to Polish & Restore Marble Flooring

This video will show you step-by-step how to resurface and polish marble flooring from grinding and removing lippage and scratches to achieving a highly reflective polish.

More Products

Stone Guide

2014 Stone World Stone Guide

The directory for Stone, Equipment and Supplies - the single information resource readers turn to.

Stone Industry Education

stone industry educationStone Industry Education is sponsored by Stone World Magazine and Marble Institute of America. The SIE events will help you: strengthen your skills, build your business, and  increase profit in your shop.  Check out stoneindustryeducation.com to register for upcoming fabricator and installer seminars.

STAY CONNECTED

facebook logo Twitter  YouTubeGoogle+